How To Fix Error Code 0x803c010b?

 Dell is a famous professional technology giant. With exceptional service and fast printing quality, it maintains a distinct position. You can access an all-in-one printer with this printer, which can fulfil all your needs. It is, however, not free of occasional flaws such as others. The Error Code 0x803c010b for the Dell printer is one of many users’ common glitches.

When this error happens, a warning notification will appear on the dell printer screen. It shows that your Dell printer has some serious problem. This will then limit the printer’s ability to print. Therefore without spending too much time, you need to immediately fix it.

You have also come to the right position when you face the same fault and tired of finding the solution to this problem. We’ll provide some wonderful tips and tricks here in this article to help you solve this problem. It is therefore advisable to review the following article. Let’s begin, therefore.

What Causes the Dell Printer Error Code 0x803c010b to Occur?

It is necessary to know the reasons behind it before the problem solving hacks are done. The error code 0x803c010b is easy to fix if you are familiar with the reason for it. Let’s look at the following reasons:
• You can face this error when connecting your printer to the Simple Network Administration protocol.
• In addition, if the drivers of the Dell printer have any problems, the printer may also prevent scanning or copying of any document.
Now the likely cause for the Dell printer is known to you. So you only need some hacks to solve this problem.

Steps To fix Error Code 0x803c010b

There are a lot of ways to fix the Dell printer error code 0x803c010b. Hence, you need to stick to the methods explained below to fix this error:

Procedure 1: Disable the Protocol

Simple network administration protocol or SNMP is a type of link which provides web-enabled data information. Thus, you may encounter the error code 0x803c010b, if you have problems with the Internet connection or with the SNMP protocol.
Therefore, the SNMP protocol should be disabled in order to check if this problem can be resolved. You should take the following steps to deactivate it:
Step 1:
First, move the cursor to the left underside of the screen and tap the Start logo. Tap the option “Control Panel” on the right panel of the Start menus.

Or you can press X and Windows key from the keyboard simultaneously and select the “Control Panel” option from a list, if you prefer.

Go under the Control Panel window to the Hardware and Sound section.

Step 2:

You should now browse the category of ‘Devices and Printers.’ Or, you can also touch the Q and Windows key from the keyboard at the same time. Then type in the search bar ‘printers.’ Select from the list the option ‘Devices and Printers.’

Step 3:

Right-click on ‘Dell Printer’ under the ‘Devices and Printers’ window. Then select the option ‘Printer Properties’ and go to the next step.
Tap the Ports tab to the top left side of the screen now. Then choose the ‘TCP/IP Standard’ port. Click on the ‘Port configuration’ option at the next window.

Step 4:

Then the box which calls ‘SNMP Enabled’ must be unchecked. Hit OK. Hit OK. You must then click on the option ‘Apply.’ Exit the current window and restart the system for changes to be saved.
Following that, try to print any document to verify whether the 0x803c010b error code is still present. If you see that the mistake continues, then proceed to the next solution.

Procedure 2: Uninstall and Reinstall the Printer Device

You can also fix this error by reinstalling the Dell printer device. To perform this, you should follow the steps given below:

Step 1:

Go first and open the Control Panel in the Start menu. Or you can use the shortcut keys if you prefer.
Step 2:

Go under Control Panel Window to ‘Hardware and Sound.’ Tap the option ‘Printer and Device.’

Step3:

You can see a complete list of your system’s installed programmes on the next window. Find ‘Dell Printer’ option by scrolling down the list. Click on it with the right-click. Select the option from the list ‘Remove Device.’ From the pop-up confirming window, tap the ‘Yes’ button.

Step 4:

This uninstalls your computer’s printer device. Then remove the plug from the power supply of the printer and restart the system.

Step 5:

Hold on the Dell printer for a few days. Following the on-screen prompt, you need to reinstall a Dell printer device.
You should now check whether or not the printing device is properly installed.

In the above guide, two simple ways to correct the Dell Printer Error Code 0x803c010b have been provided. I hope you will definitely help stop this error if you implement the above in their order.